Printed Baubles – short video
Posted: October 24, 2023 Filed under: Alcohol Ink, Echidna Studios, entwined, gel press | Tags: Alcohol Ink, Echidna Studios, gel press, Penny Black stamps, Stampin Up, Taylored Expressions 6 Comments
Last month I posted a sped up video on instagram showing how I printed alcohol ink patterns through the entwined stencil onto my 5″x7″ gel plate. I planned to add it to youtube as a vertical ‘short’ because not all my blog readers and youtube followers are on instagram. Sadly I discovered a ‘short’ on youtube must be 60 seconds or shorter. My sped up video was #shortnotshort at 77seconds. I decided to post it on horizontally on youtube anyway so I could share it here along with the cards I made from the panel.
The print you will see in the video above shows how I created the alcohol ink pattern through a stencil then pulled the print on printer paper with acrylic paint. I know there is no narration along with this very short sped up video but I go through the process in more detail with less speed in a couple of other recent videos here and here.
To make the print sturdy enough to die cut I used double sided adhesive to attach the print to thick cardstock. I used dies from a stampin up set ‘holiday ornaments’ which is possibly retired. I borrowed the set because I thought the finial style suited the symmetry of the print.
As I often do with a patterned busy element I embossed white panels to be the background. I used Taylored Expressions sheet music embossing folder, an Spellbinders in the pines folder and the one below that I don’t know the name of. The little sentiments from my well used Penny Black set, ‘holiday snippets’.
The card bases and embossed panels are Neenah solar white 110lb cardstock. That is four more cards added to my Christmas card pile which is definitely not a big enough pile just yet. At class today a few people said they had finished all their Christmas cards, but others were yet to start so I feel happy somewhere in the middle!
Today’s post features affiliate links to the following companies. If you buy through these links I receive a small commission at no extra cost to you. The Foiled Fox & Scrap’n’Stamp
Warm Reception
Posted: October 20, 2023 Filed under: Penny Black, warm reception | Tags: Artline Stix brush markers, Fabriano Watercolour Paper, Penny Black stamps, Ranger Distress inks 7 Comments
I continue to enjoy the gorgeous autumn colours outdoors these days but there will be a few wintry scenes appearing as I create cards for the coming months. This sweet house, a Penny Black stamp called ‘warm reception‘, is similar to several we see on our drive to church. They are lovely houses and look impressive during all the seasons including when they are surrounded by snow.
I did all the inking of the stamp with watersoluble markers with the stamp in a misti so I could stamp, re-ink and stamp again as needed. I was experimenting with a brand of markers I haven’t used direct to stamp before. I originally bought them for brush lettering. If you are in Australia you’ll be able to find them but elsewhere in the world they are not so common. The brand is Artline and the shell of each marker looks a bit like lego! I inked the house and trees with red, brown, green and black using the side of the brush nib to apply ink to the stamp. I spritzed the stamp lightly then stamped on hot pressed watercolour paper. After I had stamped everything I blended some of the ink with a brush and water to fill the walls of the house, tree branches and foliage.
To add background I stamped and cut a simple mask of the house from post-it note and lay it over the house so I could use a blending brush and speckled egg distress ink to fill the background sky. Once I had applied the ink I painted over it with water, just loosely, to give it the same watercolour look the rest of the image had.
I have mentioned before that distress markers have been discontinued, that’s why I wanted to try the Artline for inking stamps. I also have a pack of Staedtler water based brush pens that work well.
Today’s post features affiliate links to The Foiled Fox . If you buy through these links I receive a small commission at no extra cost to you.
Surf’s Up
Posted: October 17, 2023 Filed under: Echidna Studios, Surf's Up | Tags: digital stamps, Echidna Studios, Penny Black creative dies 2 Comments
What do you think of today’s funky van from Echidna Studios? A few months back I watercoloured the vintage VW beetle and it’s still one of my favourite digital images from the store. The new Surf’s Up image is equally cool and made me reach for some marbled paper that would make it all the more fun! The digital stamp set includes three surfboard images that can be positioned with the van or used on their own.
The paper I had was a 6″x6″ square which I was able to manually feed through my printer. I imagine some of you are wondering if I fussy cut this because I have been vocal in my dislike of fussy cutting in the past. Surprisingly I did cut it out and also an extra roof and van body from cardstock to tuck behind to lift and strengthen the cut out. I coloured directly on the marble paper with a black pencil, and white and silver gel pens.
Naturally a marbled van wanted a paisley backdrop so I embossed some pink cardstock with a cuttlebug folder I recently picked up at a garage sale. The bold die cut sentiment is from Penny Black. Hope you have a groovy day!
The leaves are turning – video
Posted: October 16, 2023 Filed under: Echidna Studios, gel press, Mooneys Trees, Stampin Up, timber embossing folder, Tutorial | Tags: Echidna Studios, gel press, gel printing, Tutorial, video 7 Comments
As the leaves start to turn around me I brought a few green ones to the gel plate and printed them in the colours of autumn. I filmed as I printed so you can see a few different techniques. There is a brief appearance of backyard wildlife that must have come in on the freshly picked leaves. Let me know if you know what it was.
As you will see in the video I used a 5″x7″ gel plate and a mix of liquitex, decoart and sennelier acrylic paints to pull prints on printer paper.
Recently I have been turning 5×7 inch prints into card fronts with a strip left for a matching envelope. For today’s cards I attached the whole print to cardstock then used WaffleFlower rectangle dies to cut panels from each print, added twine to both panels then attached them to cream card bases. There are no strips left for the envelopes but twice as many cards. I have left them without sentiments but if needed I can tie a little sentiment tag onto the twine.
The print below is also featured in the video. I thought it would be fun to print leaves onto the Mooneys Trees cut out. I used the digital cutting file to cut from cream cardstock then picked up the leaf print from the gel plate. My new timber embossing folder from SU was the perfect background.
The close up below is the two step print, pulling first the background with the leaves still on the plate, then the leaf texture after they have been removed.
I think this final card might be my favourite. I didn’t plan it this way but it looks like that little leaf is falling away from the bigger one.
Today’s post features affiliate links to the following companies. If you buy through these links I receive a small commission at no extra cost to you. The Foiled Fox & Scrap’n’Stamp
Cape Wickham Lighthouse
Posted: October 13, 2023 Filed under: cape wickham lighthouse, Echidna Studios, Stamped Landscapes | Tags: Echidna Studios, Fabriano Watercolour Paper, sennelier watercolours 10 Comments
Recently I posted a card featuring a bridge in Oregon and asked if anyone knew or had visited the bridge. It was lovely to hear from people who lived in Oregon or had visited. One person lived very near the bridge. I would love to hear from people who have seen today’s lighthouse, it is quite remote. This image is another Echidna Studios digital stamp and is special to me for several reasons.
The lighthouse is called the Cape Wickham Lighthouse and it is on King Island in Australia. My daughter created the digital design from a photo but it wasn’t one of her photos; she’s never been there. The reference photo is from a slide my dad took in 1963 when our family lived on King Island. I was born there and at age 2 had my photo taken in front of the lighthouse. So you see there is input from three generations of my family in this card!
I printed the digital image on hot pressed watercolour paper, masked the lighthouse with a few strips of painter’s tape then splattered masking fluid over the sky. I painted the sky with Sennelier watercolours and while it was still damp painted removed paint with a damp brush to create the beams of light. Once the sky was dry I removed the tape so I could add some shadow to the lighthouse and paint the grass and hut. I removed the masking fluid to reveal the stars once everything was dry. (now I’m not sure that the Cape Wickham light shines out both ways like that but I used artistic license).
Let me know if you have seen or heard of the Cape Wickham lighthouse; it is the tallest in the Southern Hemisphere!
Last minute ink smudge!
Posted: October 12, 2023 Filed under: bell & berries, Classes, Penny Black | Tags: Classes, Fabriano Watercolour Paper, Penny Black stamps, Ranger Distress inks 11 Comments
You can probably guess from the title that this card was involved in a last minute ink smudge incident. The Penny Black bell & berries stamp was stamped, blended and dry, the panel was trimmed and attached to the card base and I had just stamped the sentiment in vintage photo archival ink when the unthinkable happened. Not just one but two archival ink smudges appeared on the card, one on the top right edge and the other on the bottom edge. I think we can all assume that the culprit was my right hand! If that ink was water based I might have been able to dilute and remove it but there is none of that magic happening with archival ink.
Not only was this card destined to be sent out as one of my Christmas cards but it was also a sample in my upcoming Painting with Stamps class. I reassured myself with the thought that although the two smudges would prevent it from going in the mail, it wouldn’t stop it from being a sample and perhaps a cautionary tale as well.
But dear reader, do you see any smudges? Indeed you don’t. The fortunate positioning of those smudges meant that I could trim the whole smudge off both the right hand side and bottom edge I cut through both card base and panel combined then attached the smaller two layer panel to a new card base. My card’s mailing status has been restored.
So, if you are interested in learning how to position your smudges for the easiest rescue and recovery come along to my next in person class; there are a few spaces left.
Today’s post features affiliate links to the following companies. If you buy through these links I receive a small commission at no extra cost to you. The Foiled Fox Scrap’n’Stamp
Happy Thanksgiving
Posted: October 9, 2023 Filed under: Echidna Studios, Mooneys Trees | Tags: digital stamps, Echidna Studios, sennelier watercolours 3 Comments
Happy Thanksgiving to all my Canadian readers. Hope you’re having a relaxing weekend maybe enjoying some autumn colour.
These trees are a digital image based on trees in a park not far from our home. What a treat to have such a personal image to paint. I used the simplified cut-out image in Friday’s blog post; this is the sketch version of Mooneys trees from Echidna Studios.
To see these trees beautifully painted with bister watercolour powders pop over here.
Mooneys Trees
Posted: October 6, 2023 Filed under: baby blue leaf embossing folder, Echidna Studios, Mooneys Trees, Paper Rose, Taylored Expressions, weathered | Tags: Echidna Studios, gel press, gel printing, Paper Rose, Taylored Expressions 6 Comments
If you live in the same city as me you might have walked past these trees, sat under them or perhaps photographed them. My daughter worked from her own photo to create some digital stamps in different forms. Check out the sketch style, outline, silhouette and simplified version in the Echidna Studios etsy store. The set is named Mooneys Trees because they are growing in Mooneys Bay park.
I used the simplified version to cut several pieces to gel print on. As you can see the trees fit on a 5.5″x4.25″ card base so I was able to print patterns on them on a 5×7 gel plate. If you are on IG you can watch a very short video of me printing the one above.
All the trees featured in this blog post were made by printing three layers of paint on top of each other, letting the paint dry in between layers. I varied the paint colours and texture on each layer. On the card above you might be able to pick out bubble wrap and textured cardboard patterns.
On the card directly above and below I used hessian (burlap) to add one texture as well as cardboard packaging on another layer. I also had plastic trays featuring criss-cross patterns to press on the gel plate.
Each printed tree cutout is attached to an embossed panel of cardstock. Only one of the tree cutouts is popped up because that task had too much of a fiddliness factor! The embossed background below is called ‘weathered’ from Taylored Expressions. The embossing folder used on the card at the top of the page is ‘baby blue’ from Paper Rose Studio and the embossing folder on the second card is from Close to my Heart but I don’t know the name; it creates the look of a wooden fence.
The two sentiments are from Taylored Expressions ‘simple strips background stamp‘ which stamps 18 sentiments to be cut out with the co-ordinating die. I really enjoyed making cards featuring local trees which are changing colour right now and of course I loved gel printing the cutouts to look autumnal.
My blogpost today features affiliate links to Scrap’n’Stamp. If you buy through these links I receive a small commission at no extra cost to you.
Gelprinted Phlox
Posted: October 5, 2023 Filed under: gel press, Taylored Expressions | Tags: gel press, gel printing, Taylored Expressions 2 Comments
Yes, it’s another floral print from the gel plate. For this one I used phlox from my garden. I found that the phlox came apart quite easily so what I ended up doing was grabbing the little flowers that make up a whole flower head and stamping them individually. It took a little more time to press the flowers onto the plate one by one but the resulting print was very pretty.
When you look closely you will see the flower prints are two different colours, tan and blue. I brayered dark blue paint on the plate then pressed the little phlox flowers into the paint. As I pressed a flower onto the plate it removed paint leaving an empty flower shaped space. If I immediately pressed the flower onto the plate again it left a blue print because the petals were already covered in paint and wouldn’t remove much more until I ‘stamped’ the paint off on scrap paper. I picked up the print with shimmery pale gold paint which shows through where the flowers removed more paint.
To see my technique for gel printing with flowers check out my recent youtube video.
I used the print to make an anniversary card for a lovely couple celebrating their 55th wedding anniversary. Once again the sentiment from Taylored Expression stamped in versafine clair twilight ink said it all.
My blog features affiliate links to the following companies. If you buy through these links I receive a small commission at no extra cost to you.
Butterflies
Posted: October 3, 2023 Filed under: butterflies, Echidna Studios | Tags: Echidna Studios, Finetec artist mica watercolour paint, sennelier watercolours 2 Comments
The two butterfly images featured on today’s cards are part of a digital set called ‘butterflies‘ from Echidna Studios. If you look closely at the butterfly above you can see a hint of shimmer in that centre blue section. Most of the paint is actually shimmery in real life I just couldn’t capture it on camera.
To get the shimmery look on the wings I painted with traditional watercolours first then painted over the top with finetec pearlescent watercolours.
The stamp above has a line on it which suggests an edge to ground the butterfly; it’s clearly not in flight. I painted the area under the line with a pale grey paint then added water to spread and dilute the colour. You can see I added water to a dryer area; that’s why I got the cauliflower effect. I could have smoothed out the whole area but I occasionally like those kind of watermarks; they add interest. I completed the card with a teeny sentiment which balances the black outlines of the printed butterfly.
The second butterfly is in flight so I have nothing in the scene other than background colour. I printed the digital image with the laser printer on hot pressed watercolour paper then, before painting the butterfly I picked up some smooshed and diluted ink from my glass mat.
I feel like I have described my smoosh, spritz and swipe method many times but if you haven’t heard me mention it before here’s how it goes. I smoosh(press down) a distress ink pad on my glass mat to leave ink. In this case I used tumbled glass, scattered straw and weathered wood. I spritz the ink so it spreads and sometimes blends then I swipe my panel of watercolour paper through the ink. You never know what you’ll get. Sometimes I re-swipe to pick up a bit more ink.
After the abstract background was dry I used Sennelier watercolours to paint the butterfly. Painting a butterfly is trickier than I thought. In my mind the wings are full of blended colour but actually they are full of intricate patterns that don’t blend together. All that to say this is definitely not a botanically correct painting!
Today’s post features affiliate links to the The Foiled Fox. If you buy through these links I receive a small commission at no extra cost to you.
Heather Telford 