Roses on gel printed collage

Unsurprisingly I have built up quite a supply of gel prints. Recently I turned a bunch of them into collaged panels. You can see in the photo below the simple collage I created by gluing torn strips of three different prints in a brick-like arrangement. To make things easy I tore the strips the width of my ruler so they are all 1¼” wide.

Once I trimmed the collage panel to card sized pieces I chose a trio or roses that I designed for printing and cutting and cut it from blue cardstock using my cricut. It is one of three designs in a set called ‘Roses‘ which is available in the Echidna Studios etsy store.

When you cut a design on the cricut or with a die you often have inside pieces you can discard or use to fill in the cut out shape. I cut the rose trio from dark blue and from pink patterned paper then saved the inside pieces from the pink to inlay the blue outline.

I added embossed sentiments from the Penny Black set ‘ever thanks‘ and some embossing around one of the panels with Ranger rose gold embossing powder.

I was able to cut two smaller square panels which I also make into cards featuring the Penny Black die, ‘harmonious’. When you look at the gel prints themselves they don’t look all that fancy but when combined this way I really like the play of colours and textures.

I created a few more A4 panels from collaged gel prints and they are waiting for inspiration. I will share them here once I have a plan for them. Today’s post features affiliate links to the following companies. If you buy through these links I receive a small commission at no extra cost to you. The Foiled Fox & Scrap’n’Stamp.